PCB自动化丨收放板机丨KP-T201转向机

设备叙述  Description
1.KP-T201使用于板件需要转向的地方,它可以选择90°或180°. 动作所需时间约为6 sec/pcs,若增加产能,须考虑加装加速段,以减小板间距.  
KP-T201 is used for panel rotating. You can select rotate by 90°or 180°with approximately cycle time be concerned to reduce the gap distance of 6 sec/pcs. Additional acceleration conveyor
2.转向机构以马达作带动,配合**之制动机构,使转向动作更顺畅,定位更准确.    
Arising movement is operated by motor The special design for the control device makes the Smooth turning and precise centering.
3.圆盘使用大面积之铝合金片,板件接触面积大无偏移之顾虑,故勿需加装上压机构,避免增加板件表面受力.
The big area of aluminum round rotate plate holds the whole panel. The four angles of the panel Will not fall anymore. Not to install the upper mechanism .It will avoid the damage of the panel.        

适用制程 Process line
各联线制程及板件需作转向处
KP-T201 is used for panel turning in connecting all process.

设备名称:KP-T201 转向机
Name of Model:ST-201 Rotator
设备规格  Specifications           ST-201
长度 Length:                             1050mm
宽度 Width :                             1250mm
高度 Height:                             1100mm
工作高度 Working Height:        900±50mm
较大板件尺寸 Max. Panel Size:  610x610mm
较小板件尺寸  Min. Panel Size:  250x250mm
板件厚度 Panel Thickness:         0.075 ~ 4 mm
电源 Power Supply:                   1Ph 220V 50Hz 0.3Kw
气源 Pneumatics:                       0.6 Mpa  5Nl/min
产速 Capacity:                            6 Pcs/min